飼料混合機的使用已經非常廣泛，但由于其設計缺陷，維護、使用不當，飼料原料含有堅硬雜質，尤其是金屬類、礦物質類等雜質都給飼料加工機械的使用帶來安全隱患。那么大家在使用之前應該如何處理呢？
如果飼料混合機http://www.sk1998.cn/飛輪缺乏安全防護罩，在工作時不小心或者緊急情況下處理意外，易將工作人員服裝絞入高速轉動的皮帶內，也會使跌落在皮帶上的異物隨著高速運轉的皮帶甩向在場的工作人員，造成不必要的傷害。如果飼料混合機入料口承載長度不合理，當自動上料機傳輸上來的原料含有金屬物，特別是鐵質雜質，如螺釘、墊片、鐵塊等飼料很快進入粉碎機，輕則打碎篩片、錘片，重則直接擊穿機體，對工作人員生命安全造成直接威脅。
If the feed mixer flywheel lack of security guards, careless or handle unexpected emergency situations at work, easy to staff within the high-speed rotating cutter clothing belts, but also make foreign objects fall on the belt with the high speed of the belt Shuaixiang presence of staff, causing unnecessary harm. If the feed mixer inlet port carrying unreasonable length, when the automatic feeder transport up the raw material contains metal, especially iron impurities, such as screws, gaskets, iron and other feed quickly into the grinder, ranging from the fight broken sieve, hammer, while direct breakdown of the body, resulting in a direct threat to the lives and safety of staff.
所以飼料混合機http://www.sk1998.cn/在開機前，應該做好各種安全檢查和個人防護，此外還應該加質地優良的防護罩可有效避免誤傷，加長入料口承載板長度至80厘米~100厘米，并在承載板下面距入料口40厘米左右處加一排吸鐵石，就能很有效地防范由于鐵質雜質進入粉碎機內造成的損害和危險。在小料入料口高約30厘米~40厘米處加一半封閉蓋板，這樣既可以方便大量加入原料，如魚粉、石粉等，也能起到防止揚塵擴散的目的。
So feed mixer before turning it should do various security checks and personal protection, also should be added to the fine texture of the shield can effectively prevent accidental injury, extended the length of the feed inlet bearing
plate 80 cm to 100 cm, and in carrying board below 40 cm from the inlet port at about adding a row of a magnet, can be very effective to prevent damage due to iron impurities from entering and causing a hazard within the mill. In the
small material feed inlet height of about 30 cm to 40 cm and half closed the cover, so that both can be easily added to a large number of raw materials, such as fish meal, powder, etc., can also play the purpose of preventing the spread
of dust.